Sado Bridge

This is how the Sado Bridge works

To use the Sado Bridge Wire, you need a compatible toy from the SadoToys SadoElectric collection and a Powerbox. Our electrifiable toys, like the Kali Cruel E, are designed with two electric poles, allowing them to be used individually. For example, the Kali Cruel E features two rings of spikes, each acting as a pole, allowing current to flow between the spikes for intense stimulation.

Thanks to the integrated third connector, toys compatible with the Sado Bridge Wire, like the Kali Cruel E, can be transformed into a single electric pole. By connecting the Sado Bridge Wire to the additional connector and the other end to connector B, both rows of spikes on the Kali Cruel E assume the same electric pole, preparing it to interact with a second electrifiable device.

See how two Toys connect

Now, connect the free connector "A" of your Kali Cruel E to your Powerbox, while the other pole connects to a second electrifiable toy, such as the Spiked Plug E. This way, the current will flow between the plug and the Kali Cruel E, passing through the body and creating deep and powerful stimulation between the two toys.

The Spiked Plug E, like the Kali Cruel E, can be used alone, but with the Sado Bridge Wire you can transform it into a single electric pole. In this case, the current moves between the plug and all its spikes, as well as all the spikes of the Kali Cruel E, amplifying every impulse.

Note: To connect a second toy as a single electric pole, two Sado Bridge Wire cables are required.

Quadruple connection with two SadoElectric toys

To use two SadoElectric toys in simultaneous operation, connect the first toy by taking one pole ( connector ) of the Kali Cruel E or the first SadoElectric toy and attach it to output 1 of the Powerbox. Then connect the other pole of the Kali Cruel E or the first SadoElectric toy to one of the available jacks on output 2 of the Powerbox.

To connect the second toy, connect the remaining socket on output 1 of the Powerbox to one of the poles (connectors) of the Spiked Plug E or the second SadoElectric toy. Then connect the last available pole ( connector ) of the Spiked Plug E or the second SadoElectric toy to the remaining jack of output 2 of the Powerbox.

In this way two currents will flow through your body, one between the Plug and one of the Kali's spiked rings and one between the rest of the Kali's spikes and the Plug's spikes, providing a unique stimulation experience.

Note: This combination requires two devices from the Sadotoys SadoElectric collection.

Combinations with Other Toys

If you do not have two compatible SadoToys, you can use a single toy with the Sado Bridge Wire and complete the setup with another electrifiable SadoToys toy or with an accessory from other brands, such as a conductive rubber ring to apply to the penis, or dildos, pinwheels, etc.

However, toys from other brands do not have the third connector and therefore cannot be transformed into a single pole, losing half of the stimulation.

Additionally, our toys offer another important advantage: due to their very low resistance to current flow (approximately 0.4 ohms), they allow you to fully utilize the power of the Powerbox, ensuring intense stimulation without power loss. Other toys often do not have this feature, resulting in a loss of intensity that would also affect the connected SadoToys toy acting as the second pole.

Important Warnings

There are multiple combinations, but it is essential to avoid directing current through the head or heart. Do not use electrostimulators if you have suboptimal medical conditions, heart problems, or if you have a pacemaker or other medical devices. Always follow the instructions of the electrostimulation devices and use only certified equipment.

SadoToys disclaims all responsibility for the misuse of power devices and all its products.

Attention: Power units (Powerboxes) are not included with our products.